Resistor covers may be required for power sport applications when spark plugs alone don't provide sufficient noise suppression. Designed to reduce electro magnetic interference and radio frequency interference, which can interfere with electronic ignition components, causing misfires and poor engine performance.
- Highly durable phenolic resin and EPDM rubber
- Ceramic resistors ensure optimum performance and reliability
- Built to withstand extreme heat and vibration
- Prevents flashover
- Ensures optimal service life and performance
Size table for NGK Resistor Cap - TB05EM-R:
| EU-Size | US-Size | Foot Length (cm) |
|---|---|---|
| 38 | 5 | 24 |
| 39 | 5.5 | 24.5 |
| 39.5 | 5.5 | 24.7 |
| 40 | 6 | 24.9 |
| 41 | 7 | 25.7 |
| 42 | 8 | 26.5 |
| 43 | 9 | 27.3 |
| 44 | 9.5 | 27.7 |
| 44.5 | 10 | 28.1 |
| 45 | 10.5 | 28.5 |
| 46 | 11 | 28.9 |
| 47 | 12 | 29.7 |
| 48 | 13 | 30.6 |
| 49 | 14 | 31.4 |
How to measure your height:
Measure your foot length from the heel to the tip of your longest toe. Stand barefoot on a sheet of paper and distribute your weight evenly. Mark the very back of your heel and the tip of your longest toe, then measure the distance between those two points. Make sure you are standing straight, because the foot expands slightly under weight.
Measure your foot width at the widest part of your foot, usually across the ball of the foot. Stand barefoot on a sheet of paper, mark the outermost widest points, and measure the distance between them. Make sure your foot is flat on the floor and that the marks or tape measure are not angled.
- MB S 50 (1982 - 1982)
- MB S 50 (1980 - 1980)
- MB S 50 (1985 - 1985)
- MB S 50 (1979 - 1979)
- MB S 50 (1984 - 1984)
- MB S 50 (1983 - 1983)
- MB S 50 (1981 - 1981)
- MB S 50 (1987 - 1987)
- MB S 50 (1988 - 1988)
- MB S 50 (1986 - 1986)