- Symmetrical H4 insert
- With prismatic reflector
- Clear glass
- Parking light
- Fixing point: lateral
- E-approved
- Dimensions:
- Diameter200 mm
- diameter of headlight insert: 178 mm
- depth: 120 mm
- thread of the mounting holes: M8 x 1.25
- distance between the mounting holes: 200 mm
- distance between mounting holesup to rear of housing: 70 mm
Available in different colour variants.
Supply includes: 1 piece
Note: WITHOUT H4 bulb
Product features
- Packing: Stück
- Color: Chrome
- Width (mm): 200
- Homologation: E-geprüft
- Material: Stahl
- Diameter Ø (mm): 178
- Range: Highsider smart
Size table for HIGHSIDER smart 7 Inch LTD Headlight Chrome E-Approved (1pc):
| EU-Size | US-Size | Foot Length (cm) |
|---|---|---|
| 38 | 5 | 24 |
| 39 | 5.5 | 24.5 |
| 39.5 | 5.5 | 24.7 |
| 40 | 6 | 24.9 |
| 41 | 7 | 25.7 |
| 42 | 8 | 26.5 |
| 43 | 9 | 27.3 |
| 44 | 9.5 | 27.7 |
| 44.5 | 10 | 28.1 |
| 45 | 10.5 | 28.5 |
| 46 | 11 | 28.9 |
| 47 | 12 | 29.7 |
| 48 | 13 | 30.6 |
| 49 | 14 | 31.4 |
How to measure your height:
Measure your foot length from the heel to the tip of your longest toe. Stand barefoot on a sheet of paper and distribute your weight evenly. Mark the very back of your heel and the tip of your longest toe, then measure the distance between those two points. Make sure you are standing straight, because the foot expands slightly under weight.
Measure your foot width at the widest part of your foot, usually across the ball of the foot. Stand barefoot on a sheet of paper, mark the outermost widest points, and measure the distance between them. Make sure your foot is flat on the floor and that the marks or tape measure are not angled.