Skip to main content Skip to search Skip to main navigation
100-day return policy
Subscribe to our NEWSLETTER and get a 10% discount code (applies to the RRP)
Subscribe to our NEWSLETTER and get a 10% discount code (applies to the RRP)
Subscribe to our NEWSLETTER and get a 10% discount code (applies to the RRP)
Riderr Pulse2 Battery Charger
Description

Riderr Pulse2 Battery Charger

The Riderr Pulse2 Battery Charger combines charging, maintenance and battery recovery functions in a compact, fully automatic charger for 6 V and 12 V batteries. With a 2 A DC output, it is suitable for a wide range of battery types, including lead-acid batteries (flooded, gel, AGM, MF, CA and EFB) as well as 12 V LiFePO4 lithium batteries with capacities of up to 40 Ah. The integrated temperature compensation monitors the battery condition using a thermal sensor and adjusts the charging process accordingly. The battery repair mode detects sulphation and acid stratification and supports the restoration of battery performance. Deeply discharged batteries can be charged from as low as 1 V. The weather-resistant housing with an IP65 protection rating is designed for operation in temperatures ranging from -20 °C to +40 °C. The plug-and-play design allows for simple operation by connecting the charger, selecting the required mode and allowing the charging process to run automatically.

Features:

  • Fully automatic battery charger for charging, maintaining and restoring batteries
  • Temperature compensation with integrated thermal sensor
  • Battery repair mode for detecting sulphation and acid stratification
  • Supports the restoration of battery performance
  • Charges deeply discharged batteries from as low as 1 V
  • Weather-resistant housing
  • Simple plug-and-play operation

Specifications:

  • Output current: 2 A DC
  • Operating voltage: 6 V / 12 V
  • Supported battery types: Lead-acid (flooded, gel, AGM, MF, CA, EFB) and 12 V LiFePO4 lithium
  • Maximum battery capacity: Up to 40 Ah
  • Operating temperature: -20 °C to +40 °C
  • Protection rating: IP65

Contents:

  • 1 × Riderr Pulse2 Battery Charger
Electronics Type: Chargers & Jump Starter
Gender: Unisex
Season: All-weather
Application area: Touring

Size table for Riderr Pulse2 Battery Charger:

Measurements in:
cm
EU-Size US-Size Foot Length (cm)
38 5 24
39 5.5 24.5
39.5 5.5 24.7
40 6 24.9
41 7 25.7
42 8 26.5
43 9 27.3
44 9.5 27.7
44.5 10 28.1
45 10.5 28.5
46 11 28.9
47 12 29.7
48 13 30.6
49 14 31.4

How to measure your height:

Sizing Info
1 Foot length

Measure your foot length from the heel to the tip of your longest toe. Stand barefoot on a sheet of paper and distribute your weight evenly. Mark the very back of your heel and the tip of your longest toe, then measure the distance between those two points. Make sure you are standing straight, because the foot expands slightly under weight.

2 Foot width

Measure your foot width at the widest part of your foot, usually across the ball of the foot. Stand barefoot on a sheet of paper, mark the outermost widest points, and measure the distance between them. Make sure your foot is flat on the floor and that the marks or tape measure are not angled.

Reviews

0 out of 0 ratings

Average rating of 0 out of 5 stars

Rate this product!

Share your experiences with other customers.


de-DE fr-FR fr it-IT nl-NL de-CH de-AT fr-CH it-CH cs-CZ da-DK fi-FI no-NO pl-PL fr-BE nl-BE en-US ja-JP zh-CN zh ko-KR pt-PT pt zh-TW de-LU en-IE en ru-RU es-ES es en-GB ro-RO sv-SE en-CA fr-CA en-AU en-AE bg-BG el-GR hr-HR hu-HU lv-LV sk-SK sl-SI