Richa Infinity 2 Pro Motorcycle Textile Jacket

With the Infinity 2 Pro, Richa has improved the previous model not only visually, but also in terms of functionality and fit. The updated design is kept more discreet. The rain membrane has been revised and replaced by the laminated Aquashell pro 2l membrane. The removable lining and chest ventilation, which can be opened with the waterproof zippers, make this jacket both airy and water repellent to a certain degree. D3O® protectors on the back, shoulders and elbows ensure plenty of safety in this protection class A jacket.

Features:

detachable thermal lining for optimal insulation during the colder months
built-in zipper-controlled ventilation front and back
soft-finish neoprene collar and cuffs
velcro waist and arm adjustments
large back storage pocket plus additional front pockets for phone or wallet
sturdy collar hook
short connection zipper

Specifications:

D3O® back, shoulder and elbow protectors
prepared for D3O® divided chest protector L1 (not included)
protective clothing for motorcyclists, protection class A (EN 17092-4:2020)

Color:	black/grey/red
Size:	L
Tops Type:	Jackets
Features:	Back protector included, removable inner lining
Gender:	Men
Material:	Textile
Application area:	Touring, Urban / City
Material composition:	Outer material: 100% polyester / Inner lining: 100% polyester

Show more Show less

Size table

Size table for Richa Infinity 2 Pro Motorcycle Textile Jacket:

Measurements in:

inch

Size	Chest (cm)	Waist (cm)	Hip (cm)
XS	93 - 97	79 - 83	85 - 90
S	98 - 102	84 - 88	91 - 96
M	103 - 107	89 - 93	97 - 102
L	108 - 112	94 - 98	103 - 108
XL	113 - 117	99 - 103	109 - 114
2XL	118 - 122	104 - 108	115 - 120
3XL	123 - 127	109 - 113	121 - 126
4XL	128 - 132	114 - 118	127 - 132
5XL	133 - 137	119 - 123	133 - 138
6XL	138 - 142	124 - 128	139 - 144
8XL	148 - 152	134 - 138	151 - 156
10XL	158 - 162	144 - 148	163 - 168
12XL	168 - 172	154 - 158	175 - 180

How to measure your height:

1 Shoulder width

Measure your shoulder width across your back from the outer edge of one shoulder to the outer edge of the other. Stand upright and let your arms hang relaxed at your sides. Guide the tape measure from shoulder point to shoulder point across the upper back and make sure it does not slip.

2 Chest circumference

Measure your chest circumference at the fullest part of your chest. Run the tape measure horizontally around your upper body under your arms. Make sure the tape stays level and breathe naturally without puffing out your chest.

3 Waist

Measure your waist at the narrowest part of your torso, usually just above your belly button. Stand upright and keep breathing normally while you place the tape measure horizontally around your body. Make sure the tape is not digging in but also not too loose, so you get a realistic measurement.

4 Hips

Measure your hips at the widest part of your buttocks. Stand upright with your feet about hip-width apart and place the tape measure horizontally around your body. Make sure the tape stays at the same height all the way around and does not slip up or down.

5 Arm length

Measure your arm length from the outer shoulder point to your wrist. Let your arm hang naturally and relaxed at your side. Run the tape measure along the outside of your arm down to the wrist.

6 Inseam

Measure your inseam from the crotch down along the inside of your leg to the sole of your foot. Stand upright, ideally without shoes and with your legs slightly apart. Run the tape measure straight down and make sure it does not slip.

7 Outseam

Measure the outside leg length from your hip down the outside of your leg to the sole of your foot. Stand upright and barefoot with your legs naturally straight. Place the tape measure at the side of your hip and run it straight down to the sole. Make sure it stays close to your body and does not slip.

8 Thigh

Measure your thigh at the fullest part. Wrap the tape loosely around your leg without pulling it tight. For an accurate result, stand relaxed and distribute your weight evenly on both legs.