Name: Revit Micah TF Motorcycle Jeans
Brand: Revit
SKU: 260007518
Price: 800.17 AED
Availability: InStock
Rating: 2.0 (1 reviews)

Description

Revit Micah TF Motorcycle Jeans

It was not easy to develop a fashionable and comfortable pair of jeans at the highest AAA level, but Revit does not shy away from any challenge and introduces the Micah TF jeans. With the PWR|Shield reinforcements on the hips, seat and knees and the SEESMART protectors on the hips and knees, Revit achieved the highest AAA class for PPE in this product group. The Micah TF jeans with their tapered fit (wide at the thighs, narrowing towards the bottom) are made from a robust yet flexible 16 oz. CORDURA® denim. This gives you maximum freedom of movement, whether you're on the handlebars or on your way to your favorite hangout.

Features:

Outer fabric: 16oz Cordura® denim
Belt loops
Closure with button
5 pockets

Specifications:

Protective clothing for motorcyclists, protection class AA (EN 17092-2:2020)
SEESMART hip protectors level 1 (included)
SEESMART knee protectors level 1 (included)
Double-layer PWR|Shield on the seat, knees and hips
Triple safety seams
Reflection on hem cuff

EU declaration of conformity:

Download

Size:	33/30
Pants Type:	Pants
Features:	Knee protectors included
Gender:	Men
Material:	Textile
Application area:	Classic / Chopper, Urban / City
Protection class (certification):	Protection class AAA
Material composition:	50% Cotton, 30% Polyester, 20% Polyamide

Show more Show less

Size table

Size table for Revit Micah TF Motorcycle Jeans:

Measurements in:

inch

How to measure your height:

1 Shoulder width

Measure your shoulder width across your back from the outer edge of one shoulder to the outer edge of the other. Stand upright and let your arms hang relaxed at your sides. Guide the tape measure from shoulder point to shoulder point across the upper back and make sure it does not slip.

2 Chest circumference

Measure your chest circumference at the fullest part of your chest. Run the tape measure horizontally around your upper body under your arms. Make sure the tape stays level and breathe naturally without puffing out your chest.

3 Waist

Measure your waist at the narrowest part of your torso, usually just above your belly button. Stand upright and keep breathing normally while you place the tape measure horizontally around your body. Make sure the tape is not digging in but also not too loose, so you get a realistic measurement.

4 Hips

Measure your hips at the widest part of your buttocks. Stand upright with your feet about hip-width apart and place the tape measure horizontally around your body. Make sure the tape stays at the same height all the way around and does not slip up or down.

5 Arm length

Measure your arm length from the outer shoulder point to your wrist. Let your arm hang naturally and relaxed at your side. Run the tape measure along the outside of your arm down to the wrist.

6 Inseam

Measure your inseam from the crotch down along the inside of your leg to the sole of your foot. Stand upright, ideally without shoes and with your legs slightly apart. Run the tape measure straight down and make sure it does not slip.

7 Outseam

Measure the outside leg length from your hip down the outside of your leg to the sole of your foot. Stand upright and barefoot with your legs naturally straight. Place the tape measure at the side of your hip and run it straight down to the sole. Make sure it stays close to your body and does not slip.

8 Thigh

Measure your thigh at the fullest part. Wrap the tape loosely around your leg without pulling it tight. For an accurate result, stand relaxed and distribute your weight evenly on both legs.

Related products

Revit Seesmart RV36 Knee Protectors

(€26.88) AED 113.89

Subscription

(2)

Revit Seesmart RV33 Hip Protectors

(€17.64) AED 74.74

Subscription

(15)

Reviews

1 out of 1 ratings

Rate this product!

Share your experiences with other customers.

Log in

Your email address

Your password

Display reviews only in the current language.

Sorted by

1 review

27 May 2026 17:04

Nice jeans but could be better. Mine had an issue on the hip pocket

Positive aspects: a) Colour and finish — Nice colour overall, even though I would have preferred a non‑“used” black tone. b) Weight — They feel relatively heavy, which I actually see as a good sign, suggesting solid construction and substantial material. c) Interior construction — Partial mesh lining inside. d) Reinforcement — Double layer of PWR Shield at the seat, hips, and knees; as far as I know, it’s the only model in the Rev’It jeans range that includes this. e) Protection level — Class AAA, with Level 1 protectors on hips and knees included (although I would have preferred Level 2). f) Boot compatibility — Despite the tapered fit, I was able to wear them over my tall road boots. The look wasn’t ideal because they were quite tight around the boot area, but I must acknowledge that they did fit over them. Negative aspects: a) Manufacturing origin — Made in the United Arab Emirates, which is always the same disappointing story of not being produced in Europe. b) Used-effect wear — The “used” finishing process seems to have slightly degraded the outer shell. c) Perceived quality in hand — In hand, they don’t feel particularly premium: too many interior and exterior stitching lines waiting to be trimmed, and some panels appear slightly misaligned. d) Fit and cut — The design is overly tapered. I consider my legs and waist fairly regular, yet the taper is excessive while the upper area has too much spare fabric. Dressing and undressing them is unnecessarily difficult due to the lack of a regular fit. e) Hip protector issue — The worst flaw (and truly unacceptable): one hip protector was dramatically twisted. At first, I assumed it was poorly installed, but then I discovered the real problem — a belt loop had been stitched directly onto the protector pocket, leaving no space for the protector to sit correctly. Very poor quality control. Personal conclusion: Because of all this, I ultimately switched to the black Lombard model with its regular fit — even though I’ll miss the PWR Shield at the seat, hips, and knees, the extra “A” rating, and the additional ounce of Cordura denim.