Renthal sprockets and crown gears are developed in competitions in the USA. They are precision machined from high-quality materials. These transmission components limit friction in order to transmit as much power as possible to the rear wheel.
- Standard version
- Made from a nickel-chrome-molybdenum alloy: greater strength
- Lighter than original parts
- An excellent compromise between efficiency and longevity
Product features
- Chain pitch: 520
- Material: Stahl
- Front sprocket version: Standard
- Number of teeth: 15 Zähne
Size table for RENTHAL Steel Standard Front Sprocket 292 - 520:
| EU-Size | US-Size | Foot Length (cm) |
|---|---|---|
| 38 | 5 | 24 |
| 39 | 5.5 | 24.5 |
| 39.5 | 5.5 | 24.7 |
| 40 | 6 | 24.9 |
| 41 | 7 | 25.7 |
| 42 | 8 | 26.5 |
| 43 | 9 | 27.3 |
| 44 | 9.5 | 27.7 |
| 44.5 | 10 | 28.1 |
| 45 | 10.5 | 28.5 |
| 46 | 11 | 28.9 |
| 47 | 12 | 29.7 |
| 48 | 13 | 30.6 |
| 49 | 14 | 31.4 |
How to measure your height:
Measure your foot length from the heel to the tip of your longest toe. Stand barefoot on a sheet of paper and distribute your weight evenly. Mark the very back of your heel and the tip of your longest toe, then measure the distance between those two points. Make sure you are standing straight, because the foot expands slightly under weight.
Measure your foot width at the widest part of your foot, usually across the ball of the foot. Stand barefoot on a sheet of paper, mark the outermost widest points, and measure the distance between them. Make sure your foot is flat on the floor and that the marks or tape measure are not angled.