The product gives all painted surfaces a durable protective layer and a deep shine.
RS1 Wax Polish Spray is suitable for all aluminium, carbon fibre, titanium and painted parts of helmets, off-road and road motorcycles, quads, scooters, go-karts, bicycles, snowmobiles and jet skis.
Hazardous substance labeling:

Signal word:
- Warning
Hazard statements:
- H222 - Extremely flammable aerosol.
- H229 - Pressurized container: May burst if heated.
Precautionary statements:
- P101 - If medical advice is needed, have container or label at hand.
- P102 - Keep out of the reach of children.
- P210 - Keep away from heat, hot surfaces, sparks, open flames and other ignition sources. No smoking.
- P211 - Do not spray on an open flame or other ignition source.
- P251 - Do not pierce or burn, even after use.
- P260 - Do not breathe aerosol.
- P301+P310+P331 - IN case of ingestion: Call a doctor immediately. DO NOT induce vomiting
- induce vomiting.
- P410+P412 - Protect from sunlight and do not expose to temperatures exceeding 50 °C.
- P501 - Dispose of contents/container to a waste collection point in accordance with local, regional, national and/or international regulations.
- to a waste collection point in accordance with local, regional and/or international regulations.
Other information: -
Other hazards: -
Hazardous ingredients: -
| Tank size: | 0.5000 LITER |
|---|---|
| Execution: | Polishing |
Size table for Putoline Polishing agent with wax, RS1 Wax-Polish Spray, 500 ml:
| EU-Size | US-Size | Foot Length (cm) |
|---|---|---|
| 38 | 5 | 24 |
| 39 | 5.5 | 24.5 |
| 39.5 | 5.5 | 24.7 |
| 40 | 6 | 24.9 |
| 41 | 7 | 25.7 |
| 42 | 8 | 26.5 |
| 43 | 9 | 27.3 |
| 44 | 9.5 | 27.7 |
| 44.5 | 10 | 28.1 |
| 45 | 10.5 | 28.5 |
| 46 | 11 | 28.9 |
| 47 | 12 | 29.7 |
| 48 | 13 | 30.6 |
| 49 | 14 | 31.4 |
How to measure your height:
Measure your foot length from the heel to the tip of your longest toe. Stand barefoot on a sheet of paper and distribute your weight evenly. Mark the very back of your heel and the tip of your longest toe, then measure the distance between those two points. Make sure you are standing straight, because the foot expands slightly under weight.
Measure your foot width at the widest part of your foot, usually across the ball of the foot. Stand barefoot on a sheet of paper, mark the outermost widest points, and measure the distance between them. Make sure your foot is flat on the floor and that the marks or tape measure are not angled.