These high-performance spark plugs with a centre electrode made of the precious metal iridium are used by many manufacturers as original equipment. They were developed especially for the latest engine technologies, but also for older models they are the alternative to the standard type in order to make full use of power reserves.
The special thing about them:
- The electrode material Iridium is almost resistant to spark erosion.
- Iridium enables particularly narrow centre electrodes of only 0.6 mm diameter.
- With narrow centre electrodes, more ignitable mixture reaches the ignition spark. This leads to reliable ignition and better propagation of the flame front.
Details
Wrench width: 18.0 mm
Thread diameter: 12.0 mm
Thread length: 19 mm
Electrode distance: 0.9 mm
Resistance: suppressed, 5 kOhm
Note: Only one spark plug is included in delivery.
Size table for NGK DPR 8 EIX-9 spark plug:
| EU-Size | US-Size | Foot Length (cm) |
|---|---|---|
| 38 | 5 | 24 |
| 39 | 5.5 | 24.5 |
| 39.5 | 5.5 | 24.7 |
| 40 | 6 | 24.9 |
| 41 | 7 | 25.7 |
| 42 | 8 | 26.5 |
| 43 | 9 | 27.3 |
| 44 | 9.5 | 27.7 |
| 44.5 | 10 | 28.1 |
| 45 | 10.5 | 28.5 |
| 46 | 11 | 28.9 |
| 47 | 12 | 29.7 |
| 48 | 13 | 30.6 |
| 49 | 14 | 31.4 |
How to measure your height:
Measure your foot length from the heel to the tip of your longest toe. Stand barefoot on a sheet of paper and distribute your weight evenly. Mark the very back of your heel and the tip of your longest toe, then measure the distance between those two points. Make sure you are standing straight, because the foot expands slightly under weight.
Measure your foot width at the widest part of your foot, usually across the ball of the foot. Stand barefoot on a sheet of paper, mark the outermost widest points, and measure the distance between them. Make sure your foot is flat on the floor and that the marks or tape measure are not angled.



