The rest system 2Slide represents the current state of development of the racing scene. The arrangement of the footrests can be adjusted horizontally in four positions. Two height positions result from the superimposed guide grooves.
The detent bodies are designed short and grip -knurled, the base plates and levers anodized. The gearshift lever is pulled down low to prevent unintentional shifting when changing lean angles due to shifting. Different spacers are used to adapt the shift rod to the different detent positions.
For use with reversed shift position, many models only require the transmission lever to be reversed, others require a conversion kit.
Following items match this product:
Folding detent joints / Racing II detents / Extreme detents.
| Assembly instructions: | Download |
| ABE: | Download |
| Color: | black |
|---|---|
| Execution: | Adjustable |
| Diameter: | 0.000000 |
Size table for LSL 2-slide footrest system Z 750 07-/Z 750R 11-:
| EU-Size | US-Size | Foot Length (cm) |
|---|---|---|
| 38 | 5 | 24 |
| 39 | 5.5 | 24.5 |
| 39.5 | 5.5 | 24.7 |
| 40 | 6 | 24.9 |
| 41 | 7 | 25.7 |
| 42 | 8 | 26.5 |
| 43 | 9 | 27.3 |
| 44 | 9.5 | 27.7 |
| 44.5 | 10 | 28.1 |
| 45 | 10.5 | 28.5 |
| 46 | 11 | 28.9 |
| 47 | 12 | 29.7 |
| 48 | 13 | 30.6 |
| 49 | 14 | 31.4 |
How to measure your height:
Measure your foot length from the heel to the tip of your longest toe. Stand barefoot on a sheet of paper and distribute your weight evenly. Mark the very back of your heel and the tip of your longest toe, then measure the distance between those two points. Make sure you are standing straight, because the foot expands slightly under weight.
Measure your foot width at the widest part of your foot, usually across the ball of the foot. Stand barefoot on a sheet of paper, mark the outermost widest points, and measure the distance between them. Make sure your foot is flat on the floor and that the marks or tape measure are not angled.
- Z 750 (Z750L)
- Z 750 ABS (Z750M)
- Z 750 R (Z750N)
- Z 750 R ABS (Z750P)






