Dimensions Stator:
A: Outside diameter: 134 mm
B: Inside diameter: 70,5 mm
C: Iron core thickness: 16,5 mm
D: Coil thickness: 27.5 mm
Scope of supply: 1 KIT
1X stator ESG991
1X controller ESR857
Note:
Technically modified stators are excluded from exchange!
WARNING: This regulator is not suitable for a lithium-ion battery! The battery or other electronic components may be damaged!
| Execution: | Stator/Regulator |
|---|
Size table for ElectroSport Stator/Controller KIT ESK225:
| EU-Size | US-Size | Foot Length (cm) |
|---|---|---|
| 38 | 5 | 24 |
| 39 | 5.5 | 24.5 |
| 39.5 | 5.5 | 24.7 |
| 40 | 6 | 24.9 |
| 41 | 7 | 25.7 |
| 42 | 8 | 26.5 |
| 43 | 9 | 27.3 |
| 44 | 9.5 | 27.7 |
| 44.5 | 10 | 28.1 |
| 45 | 10.5 | 28.5 |
| 46 | 11 | 28.9 |
| 47 | 12 | 29.7 |
| 48 | 13 | 30.6 |
| 49 | 14 | 31.4 |
How to measure your height:
Measure your foot length from the heel to the tip of your longest toe. Stand barefoot on a sheet of paper and distribute your weight evenly. Mark the very back of your heel and the tip of your longest toe, then measure the distance between those two points. Make sure you are standing straight, because the foot expands slightly under weight.
Measure your foot width at the widest part of your foot, usually across the ball of the foot. Stand barefoot on a sheet of paper, mark the outermost widest points, and measure the distance between them. Make sure your foot is flat on the floor and that the marks or tape measure are not angled.
- 883 C Sportster Custom XL
- XL 1200 L SPORTSTER LOW
- XL 1200 R SPORTSTER ROADSTER
- XL 883 C SPORTSTER
- XL 883 L LOW